Question: Can I Tow With A 3.23 Gear Ratio?

Are 3.42 gears good for towing?

Upgrading to the 3.42 axle ratio package brings the tow rating to 11,400 pounds, and the 6.2-liter V8 engine brings the highest tow capacity to 12,100 pounds.

….

Is 3.23 a good gear ratio?

The engineers likely chose the numerically low gear ratio for fuel economy reasons. … A later swap to a four-speed and 3.23 rear gears woke up the performance of the car considerably. Yes, highway rpm increased as well, but I rationalized it by deciding that 3.23 gears provided a good balance of performance and economy.

Is 3.08 a good gear ratio for towing?

Two common base axle ratios for trucks are 3.08 and 3.42. A 3.73 ratio is suitable for regular light towing. If you plan on towing a fifth-wheel trailer or anything heavier than 5,000 pounds, you should consider a 4.1 axle ratio. A 4.1 ratio allows a towing vehicle to start moving without as much throttle.

What is the best gear ratio for towing?

3:55The most popular rear end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy. This is a good ratio for the occasional towing or hauling individual. For a person who tows more often, and heavier loads, the 3:73 or 4:10 may be more appropriate.

Are 3.31 gears good for towing?

“The 3.31 might be capable of towing the trailer. But if you are towing the majority of the time, you probably want the 3.55 because it will tow better and provide better fuel economy loaded.” Start with the total combined weight of the vehicle. … Note that pickup tow and haul ratings are listed by axle ratio.

Is a 4.10 gear ratio good for towing?

FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic. … A 4.10 rear axle ratio is ideal for towing larger 5th Wheel or Gooseneck trailers.

What gear ratio do I have by Vin?

Check the bolts on the differentials. There should be a tag on one of them. The codes on that tag will tell you the gear ratio. The VIN will not give you gear ratios in most cases.

Is a 3.23 axle ratio good for towing?

The 2019 Silverado is available with either a 3.23 or 3.42 rear axle ratio. While the 3.23 axle ratio provides both strength and reliability, the 3.42 ratio is what you need for rugged capability and maximum towing capacity. The 3.42 axle ratio is either standard or available through the Max Trailering Package.

Is 3.42 or 3.73 better?

The 3.42 is fine for towing smaller boats, plus you will get better gas mileage for everyday driving. If I were towing frequently on hilly roads, I might would go for the 3.73 for better gas mileage while towing, but the 3.42 should be fine with a 205.

Is 3.55 or 3.73 gears better?

A numerically higher axle ratio provides a mechanical advantage to send more of the engine’s available torque to the rear tires (and front tires, in a four-wheel drive vehicle), but you pay the price at the fuel pump. So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.

How much can a 5.3 L v8 tow?

Its towing capacity is 7,900 pounds. 5.3L V8 Engine: With this available engine, the Chevy Silverado 1500 achieves 355 hp and 383 lb-ft of torque. Towing capacity is elevated to 11,600 pounds. 6.2L V8 Engine: Equipped with this engine, the Chevy Silverado 1500 can tow its maximum of 13,400 pounds (on the RST trim).

Does gear ratio affect horsepower?

Motor HP does not change when you change gear ratios. The only thing that changes is torque. A dynamometer measures torque and RPM, and from those two values calculates horsepower. When you change gear ratios both RPM and torque will change but horsepower will not.

Does higher gear ratio mean faster?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.

Are 3.73 or 4.10 gears better?

Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed. So, by changing your gear ratio, no power levels are being changed, just the torque….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOBetter gas mileageWorse gas mileageHigher top speedLower top speed2 more rows•May 12, 2020

Are 3.73 gears good for highway?

Rear end gears (2.79’s, 3.00’s, 3.25’s, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop. Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc. Always remember, for very “give” there is a “take”.

Are 4.10 gears good for highway?

Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. … Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once.

What’s the best gear ratio for 35 inch tires?

Depending on the axle, the next lowest ratio from a 4.10:1 is most likely the 4.56:1, which should be selected for towing and performance. Because of the extra weight associated with off-road tires, we usually recommend going with a performance-minded gear ratio for any tire size above 35 inches.

How fast can you go with 4.10 gears?

On the highway a 4.10 gear will only be about 200 rpms more at around 75 then a 3.73. And with the Automatic you will need all the help you can get. Top Speed of our GT’s should be between 145 and 155 depending on the tune of your chip if you have one.